Krückemeyer · Double-sided tape
RK 811 Double-Sided Adhesive Tape - 1,540 mm x 50 m
RK 811 double-sided adhesive tape – 1,540 mm x 50 m: transparent, nonwoven backing, synthetic rubber, silicone paper.
Each variant is a separate article with its own page – your selection opens the sibling variant.
Fig. 01 — Product view
Product description
Overview of RK 811 double-sided adhesive tape
The RK 811 double-sided adhesive tape has adhesive on both sides, a nonwoven backing and a synthetic rubber adhesive, covered by a silicone paper release liner. At 1,540 mm wide and 50 m long, it provides a robust, invisible bond for applications requiring an attractive appearance. Its transparent properties help minimise raised adhesive areas or edge formation.
The nonwoven backing conforms well to smooth and slightly curved surfaces, while the silicone paper release liner makes assembly easy. At 0.1 mm thick, it keeps the profile very low, particularly useful for visible bonds. The 76 mm core makes roll changes in production easier.
Suitable for bonding on both sides to smooth surfaces
This tape provides reliable adhesion on both sides to smooth substrates such as metal, glass and plastic. The combination of nonwoven backing and rubber adhesive creates a strong bond, while the silicone paper enables clean release. Its transparency helps keep bonds visually discreet.
Dimensions and specifications of RK 811
- Width: 1,540 mm
- Length: 50 m
- Thickness: 0.1 mm
- Core: 76 mm
- Backing material: Nonwoven fabric
- Adhesive: Synthetic rubber
- Liner: Silicone paper
- Colour: Transparent
High conformity from the nonwoven backing
The nonwoven backing conforms very well to irregular surfaces and reduces laminate separation. The 0.1 mm thickness creates an almost invisible profile, suitable for demanding assembly work. Transparency reduces the visibility of the bond line.
Application tips for a clean bond
- Clean surfaces thoroughly and keep them dry before bonding.
- Remove the release liner fully and position the tape.
- Press down with light pressure to ensure even adhesion.
Construction: nonwoven backing with synthetic rubber
The combination of nonwoven fabric and rubber adhesive provides consistent bonding results and a straightforward production process. The silicone paper protects the adhesive side until use and prevents premature sticking.
Product Properties
| Adhesive | synthetic rubber |
|---|---|
| Release liner | silicone paper |
| Length in m | 50 |
| Width in mm | 1540 |
| Colour | transparent |
| Core in mm | 76 |
| Carrier material | Nonwoven fabric |
| Thickness in mm | 0.1 |
Advice on this product
Krückemeyer technical support
Technical sales
Not sure whether this product fits your application? Our technical sales team checks your requirements, samples alternatives and quotes custom-made solutions.
Product consultation
Thomas Klein
Contact for products
Talk to Thomas Klein about your requirements and the right product.