Removable tesa double-sided tape

tesa 65610 Removable uses a PE foam carrier with a PET reinforcement film. The film helps remove foam and adhesive residues from the liner-covered side. tesa 70465, by contrast, is a double-sided Bond & Detach tape whose adhesive is stretched for removal. These methods place different demands on the bond design and disassembly. Choose according to the joined parts, surfaces, bonding time and access to the tape during removal; a property of one product does not automatically apply to the other.

No. Removability alone does not establish that a tape can be repositioned or reused. Removable describes separation of an existing bond under the conditions specified for the particular product. Repositioning means adjusting a tape again during application; reuse requires another application of the same tape. The substantiated information for tesa 65610 and tesa 70465 describes their respective removal methods, not general reusability. Decide at the selection stage whether you need only later disassembly or also a further adjustment.

The PET reinforcement film makes it possible to remove foam and adhesive residues from the liner-covered side of tesa 65610 Removable. The manufacturer explicitly limits this statement to that side of the tape. The substrate and actual bonding time also matter for disassembly. Before bonding, the surfaces should be dry and free from dust, oil and dirt. Check on your part which side must later be released and whether the intended removal method is compatible with that part.

tesa 65611 Removable Cold Performance was developed for applications at low temperatures. It is a double-sided PE foam tape with PET reinforcement; the film helps remove residues from the liner-covered side. Suitability for your application still depends on the specific substrate, processing conditions, load and required bonding time. Include these conditions in your enquiry so that the selection and later removal can be assessed together.