Iguna HS - High Standard Acrylic Foam - 0.8 mm Thick - 900 mm x 33 m

<h2iguna hs im>

Iguna HS is a permanent, double-sided high-performance adhesive tape for structural bonding indoors and outdoors. It offers excellent UV and solvent resistance and is particularly suitable for bonding high-surface-energy materials such as steel, aluminium and ABS.

With a thickness of 0.8 mm, a width of 900 mm and a length of 33 m, the tape provides a large bonding area. Its colour is grey, the adhesive is acrylic and the liner is a film.

Temperature and resistance data: -30 °C to +120 °C continuously, and briefly up to +180 °C.

Suitable for high-surface-energy materials

This double-sided adhesive tape enables structural bonding on demanding surfaces such as steel, aluminium and ABS, including outdoors. The acrylic bond provides lasting adhesion under temperature fluctuations and changing environmental conditions.

Technical data for Iguna HS 61112

• Width: 900 mm
• Length: 33 m
• Thickness: 0.8 mm
• Colour: Grey
• Adhesive: Acrylic
• Liner: Film
• Temperature resistance: -30 °C to +120 °C
• Short-term resistance: +180 °C

Construction and material selection

The product construction is based on an acrylic foam carrier with an acrylic adhesive. The protective film facilitates storage and allows clean installation.

Application tips

1. Clean substrates thoroughly and keep them dry and free of grease.
2. Remove the protective film and position the tape carefully.
3. Apply light pressure to establish full contact.
4. After installation, pay attention to the ambient temperature to ensure consistent adhesive strength.

</h2iguna>