Iguna CL - Clear acrylic foam - 0.5 mm thickness - 500 mm x 33 m

Iguna CL – Clear acrylic foam at a glance

The Iguna CL Clear is a permanent, double-sided high-performance adhesive tape based on acrylic foam. It is suitable for transparent structural bonds indoors and outdoors and offers excellent UV and solvent resistance. The adhesive tape structure combines clear transparency with strong adhesion to glass, polycarbonate (PC) and PMMA.

With a thickness of 0.5 mm, a width of 500 mm and a length of 33 m, Iguna CL Clear delivers a robust, uniform bond over long runs. The tape uses an acrylic adhesive with a protective film liner and is available with a transparent appearance. Its temperature resistance extends from -40 °C to +100 °C (short-term up to +160 °C), allowing it to withstand temperature fluctuations.

Typical applications include bonding transparent components such as glass, PC or PMMA, e.g. in facade cladding, display protection or viewing windows where low visibility and high strength are required. The product is classified as a bestseller.

Suitable for transparent bonds

Transparent components

Thanks to its transparent appearance and strong adhesion, Iguna CL Clear is an ideal solution for glass or transparent component assemblies.

Environmental and temperature stresses

The adhesive tape surface offers UV and solvent resistance as well as aging, moisture and chemical resistance, enabling a reliable long-term bond even in demanding environments.

Dimensions and technical specifications

• Width: 500 mm
• Length: 33 m
• Thickness: 0.5 mm
• Color: Transparent
• Adhesive: Acrylic
• Liner: Film
• Temperature range: -40 °C to +100 °C
• Short-term exposure: +160 °C

Properties and benefits

• Virtually invisible bond: Transparent appearance minimizes visibility
• High resistance: UV and solvent resistance, aging, moisture and chemical resistance
• Versatile adhesion: Adheres reliably to glass, PC and PMMA
• Thickness and backing: 0.5 mm thickness with acrylic foam offers contour conformity and good compensation

Application & practice

1. Prepare surfaces so that they are clean, dry and free of grease
2. Peel off the protective film and position the bond
3. Apply even pressure and remove air bubbles
4. Use within the environmental range as required

Construction & material characteristics

The core consists of acrylic foam with an acrylic adhesive, characterized by good adhesion and lasting adhesive strength. The film covers the bonding area until installation and ensures straightforward application.