RK 1020 Double-Sided Plate Mounting Tape - 1250 mm x 250 m

RK 1020 Double-Sided Plate Mounting Tape – 1250 mm x 250 m at a Glance

RK 1020 Double-Sided Plate Mounting Tape is a double-sided adhesive tape with a rigid PVC film backing. It combines adhesive on both sides with a creped PVC film liner to enable secure mounting of relief plates and printing plates. With a width of 1250 mm and a length of 250 m, it offers an extensive supply for processing and storage, while its thickness of 0.2 mm ensures a low profile.

The tape is transparent, making visual inspection of the substrate easier and supporting precise positioning. The core has a diameter of 76 mm, allowing easy unwinding in the winding system.

Suitable for Printing Plate Mounting

Printing Plate and Relief Plate Processing

Designed specifically for mounting relief plates or printing plates, RK 1020 enables stable, double-sided attachment with uniform adhesive strength over the entire area. The combination of rubber adhesive and rigid PVC film provides reliable adhesion to typical printing plate surfaces and stability during extended operation.

RK 1020 Dimensions and Specifications

• Width: 1250 mm
• Length: 250 m
• Thickness: 0.2 mm
• Core: 76 mm
• Backing: Rigid PVC film
• Adhesive: Rubber
• Liner: Creped PVC film
• Color: Transparent

Construction: Rigid PVC Film, Rubber Adhesive

The backing consists of rigid PVC film, which provides dimensional stability. The adhesive layer is formed by rubber and offers high adhesion to relief plates and printing plates. The creped PVC film liner protects the adhesive layer until use.

Backing

Rigid PVC film provides a robust, thin profile and dimensionally stable bonding.

Adhesive

Rubber adhesive ensures good adhesion to typical surfaces in print production.

Liner

Creped PVC film acts as a self-supporting liner and makes it easier to expose the adhesive sides.

Application Tips and Practice

1. Prepare a clean, dry and grease-free substrate.
2. Cut the tape to the desired length and mark the position if necessary.
3. Remove the liner or establish a clear view and position the relief plate or printing plate.
4. Press down evenly, avoiding air bubbles.

SPECIAL FEATURES

• Transparent film facilitates visual inspection before bonding
• Low profile of 0.2 mm enables slim bond lines
• Extended roll feed thanks to 250 m length